Who is running a lift kit? What brand is it and how tall?
Who is running a lift kit? What brand is it and how tall?
2008 KC XE BT
Mods: DIY Intake mod, K&N Air filter,JWT CS2 CAMS, 09 piping/12278 18" Magnaflow
PRG Advanced 4x4 Xterra Coilover Lift 3 inches front and 4 inches in back with extended brake lines and cam bolts.
The name's Rook
2007 Xterra S 5spd AT
Χάος (Khaos) - "the inherent unpredictability in the behavior of a complex system"
Stage 2 Fabtech, I'm happy with it, but if I knew back then about these trucks what I know now, I probably would have taken a different route.
Pro Comp Stage 2 Kit
pc stage kit, 3" body. i got about 10" soon to be at 11 or 12"
fabtech 6inch with 3inch body lift. was going to fab up some uca's and spacers and throw 4inch blocks on the rear for a total of 11inch's but decided i would try and sell it
2005 NISSAN TITAN 4X4 CREW CAB, 6INCH FABTECH LIFT, 3INCH PERFORMANCE ACCS LIFT, SHACKLE MOUNTS FLIPPED, CUSTOM SHACKLES, 08 COIL OVER SPRINGS, 38.5X15.5 SUPER SWAMPER RADIALS, 18X10 ULTRA ROGUE WHEELS, SUPER CHIPS CORTEX, VOLANT COLD AIR INTAKE, FLOWMASTER EXHAUST, RUNNING BOARDS, LINEX BEDLINER, RANCH HAND REAR BUMPER, PRG SWAY BAR ENDLINKS, PRG DRIVE SHAFT SPACER, TINTED WINDOWS, TINTED TAIL LIGHTS AND 3RD BRAKE LIGHT, ELECTRIC REAR SLIDING WINDOW, E-LOCKER,
I recently bought an 07 Titan that is lifted. I cannot figure out the brand of the lift. It needs upper ball joints. It's like a heim joint really. A lot bigger than stock. No one seems to be able to help me. Any suggestions?
I'm running fabtech 6 inch lift kit. So far so good.
There are currently 1 users browsing this thread. (0 members and 1 guests)