PDA

View Full Version : Just released JWT CS2 cam set for 2007+ VK56 V8



nickspeed
02-15-2010, 09:55 PM
http://i30.photobucket.com/albums/c340/nismonick/VK56/VK56_CS2_CAMS.jpg
JWT has released the first performance camshafts available for the 2007+ VK56DE, which incorporates intake cam phasers for a much broader torque curve. The ability to gain over 26 WHP and still maintain a wide torque curve is owing to JWT’s years of development on Nissan VQ35 V6, which has always used intake cam phasers. This new VK engine has a mass flow balance that allowed JWT to design the new CS2 profiles to run safely to 6500 rpm (well beyond peak power) with only a spring upgrade on the intake side. PART# AVK56-07CS2 Call to order with intake spring set.
Cams are $1198.00
http://www.jimwolftechnology.com/customer_part_detail.asp?PartID=503
Intake springs are $159.20
http://www.jimwolftechnology.com/customer_part_detail.asp?PartID=504
VK56 Camshaft spec card
http://www.jimwolftechnology.com/wolfpdf/CAM_SPEC_CARD_VK56_ALL.pdf

Twistedfreedom
02-15-2010, 10:00 PM
Its a sad day, my truck is sold and cams come out :/

kha4079
02-15-2010, 10:35 PM
oooohhh sweeeettt!!!!

O-Fivecc
02-15-2010, 10:45 PM
Sweet! So will these NOT have the dead spot before 3000 RPM or so? Are these better then the 04-06 cams because he used "phasers" on these? I'm just wondering if their would be more of a gain with these on an 07+ truck then the previous cams for the 04-06 trucks......It may be time to trade for an 07 LOL

nickspeed
02-15-2010, 11:00 PM
No dead spot! That dyno graph is of my truck bone stock with the DIY intake mod and a drop in K&N. So These with cai, headers, exhaust and tunning=FUCKING FAST!!! Then add the PGIM!

SiMpLyMoDiFiEd
02-15-2010, 11:51 PM
Nice post prices

nickspeed
02-15-2010, 11:57 PM
Prices are not up on there site yet.

08BLIZZARD
02-16-2010, 12:32 PM
if you could see my face right now!!!

i look like a little 15 year old girl front row at an nsync concert!!!!!! we love you!!!!!!!!!!


and i have a first time home buyers tax credit coming!!!!

nickspeed
02-16-2010, 01:49 PM
if you could see my face right now!!!

i look like a little 15 year old girl front row at an nsync concert!!!!!! we love you!!!!!!!!!!


and i have a first time home buyers tax credit coming!!!!

There is going to be a new FST RECORD very soon!

nickspeed
02-16-2010, 02:33 PM
I updated the first post.

R3DN1CK
02-16-2010, 03:07 PM
Get some! I assure you that truck is fast... he won't let me drive it though.

kha4079
02-16-2010, 10:25 PM
cant wait to see em :D

kha4079
02-16-2010, 10:25 PM
There is going to be a new FST RECORD very soon!

;)

nickspeed
02-16-2010, 11:20 PM
cant wait to see em :D

You get all the spec you wanted?

kha4079
02-16-2010, 11:40 PM
sure did i wonder how long its gonna take to ship em?

nickspeed
02-16-2010, 11:52 PM
sure did i wonder how long its gonna take to ship em?

Should only be a few days for Sad Diego to TX.

nickspeed
02-17-2010, 03:05 AM
Here's the spring tool in action.
http://i30.photobucket.com/albums/c340/nismonick/VK56/DSC_0226.jpg

08BLIZZARD
02-17-2010, 10:59 AM
sure did i wonder how long its gonna take to ship em?

did you order a set?

nickspeed
02-17-2010, 12:40 PM
He is going all out, CS2's and all the JWT springs! KHA4079 is going to have a fire breathing monster on his hands!

Warp09
02-17-2010, 08:08 PM
I want more information on the PGIM! It's something I can actually use :P

nickspeed
02-17-2010, 08:13 PM
I want more information on the PGIM! It's something I can actually use :P

That is up next. Well update as I get info.

O-Fivecc
02-17-2010, 09:45 PM
P g i m p g i m p g i m p g i m!!!!!

von
02-17-2010, 10:13 PM
P g i m p g i m p g i m p g i m!!!!!

X2

kha4079
02-17-2010, 10:24 PM
id like to see more on the intake manifold i also have to start saving up it too lol :D

kha4079
02-17-2010, 10:26 PM
He is going all out, CS2's and all the JWT springs! KHA4079 is going to have a fire breathing monster on his hands!

http://i333.photobucket.com/albums/m397/kha4079/smileys/secret.gif........................

O-Fivecc
02-17-2010, 10:47 PM
You going to get a higher stall KHA?

kha4079
02-17-2010, 10:58 PM
You going to get a higher stall KHA?

yeah might as well do it all since shes gonna be under the knife :)

nickspeed
02-17-2010, 11:03 PM
P g i m p g i m p g i m p g i m!!!!!

Hey I talk to JWT about make a more drag cam. The can do a S7/S2 hybrid that would loss low end but make up for it on the top end like a bat out of hell.

nickspeed
02-17-2010, 11:04 PM
yeah might as well do it all since shes gonna be under the knife :)

He is going for it!!!

von
02-17-2010, 11:11 PM
Hey I talk to JWT about make a more drag cam. The can do a S7/S2 hybrid that would loss low end but make up for it on the top end like a bat out of hell.

That would be sweet. Let us know.

nickspeed
02-17-2010, 11:13 PM
That would be sweet. Let us know.

That is for the non vvt like O-fivecc. The VVT cams might get that with tunning.

von
02-17-2010, 11:14 PM
I would love the s7. Do they make the s7 or its just a prototype?

nickspeed
02-17-2010, 11:24 PM
I would love the s7. Do they make the s7 or its just a prototype?

They will make them if you want them.

O-Fivecc
02-18-2010, 11:15 PM
Man, I really like low-end though. I guess I have to decide which one I like the most, low-end or top-end. I do mostly stop light driving though (below 60 MPH). Of course, I could always do a 75 shot from say 2000-4000 RPM and make up for it LOL

08BLIZZARD
02-19-2010, 03:16 PM
so these really dont effect the low end too much?

nickspeed
02-19-2010, 03:39 PM
The CS2 doesnt really kill the low end, and the top end for 4K+ is fucking crazy like a vtec!!! So get it tunned and headers and let the VK beath like it should!!!

nickspeed
02-19-2010, 03:41 PM
Man, I really like low-end though. I guess I have to decide which one I like the most, low-end or top-end. I do mostly stop light driving though (below 60 MPH). Of course, I could always do a 75 shot from say 2000-4000 RPM and make up for it LOL


The S7/S2 hybrid on a 04 motor with nismo headers, K&N CAI, 07 intake manifold, and 07 exhaust= 370HP untunned. Call JWT for more info the S7/S2 hybrid non vvt cams.

tat2titan
02-19-2010, 06:51 PM
Interesting!

O-Fivecc
02-19-2010, 07:33 PM
What the hell!!!!??? Screw low end, thats serious HP, couple that with a higher stall and I'm well in the 12's, maybe mid 12's, then with a 100 shot?? LOL

nickspeed
02-19-2010, 09:31 PM
JWT says yes on S7/S2 and NOS.

O-Fivecc
02-19-2010, 10:47 PM
I'm going to start saving now then

nickspeed
02-19-2010, 11:02 PM
Some one^^^ want to go FAST!!!

O-Fivecc
02-19-2010, 11:32 PM
Why not, I plan on keeping the truck. Then I will get another vehicle when this is paid off, and just keep this as my mod vehicle. By the time I'm done paying this thing off, we should have some gear options, more trans options, and some more motor stuff (lol). I'll just dump money into this truck so I won't have to on my next vehicle (LOL, we will see how far I get with that)

nickspeed
02-19-2010, 11:46 PM
I plan on doing the samething, as long as the nxt gen happen's I will be getting one and keeping this one and many pick up another one to make a full blow prerunner with a VK56VD swap and 500hp on tap.

O-Fivecc
02-20-2010, 08:06 AM
Nothing like a 4 door crew cab running 11's. And I think I can do it on stock motor...I just need to help out the trans a little bit. Cams, Stall, and Nitrous

nickspeed
02-20-2010, 04:14 PM
I think it's do about too!!!

kha4079
02-20-2010, 10:18 PM
it can happen :D

tat2titan
02-21-2010, 12:04 AM
Same here, i'm keeping my T as my mod. project vehicle. I need my exhaust work done, a TransGo Kit & a PML trans. pan. Then i'm all over a set of JWT Cam's!!! :)

kha4079
02-21-2010, 10:31 PM
speaking of tranny pan mine is on its way ;)

R3DN1CK
03-01-2010, 02:36 AM
Get some JWT boys. It's hot off the grill, BBQ time. Think of them as iron hotdogs for your Titans.

vexmatech
05-24-2017, 04:36 AM
these NOT have the dead spot before 3000 RPM or so? Are these better then the 04-06 cams because he used "phasers" on these? I'm just wondering if their would be more of a gain with these on an 07+ truck then the previous cams for the 04-06 trucks