PDA

View Full Version : Vvt cams



kha4079
01-19-2010, 07:28 PM
i know im probably getting on everyones nerves, but i wanna know an update on them!!! im getting my income tax so i should have a good amount of change to buy them! :peace:

R3DN1CK
01-19-2010, 07:31 PM
check with nickspeed

nickspeed
01-19-2010, 07:37 PM
What do you want to know and I will answer what I can, were very heavy into the testing for them and are trying to get them done asap so you the customer can have a alsome product.

nickspeed
01-19-2010, 07:44 PM
And there going called cvtcs cams, thats the name of the system nissan used for the vvt setup on the vk56. Been learing about the controller and what it does to the cams, crazy stuff.

R3DN1CK
01-19-2010, 07:47 PM
I saw something that looks like a truck that had jwt cams in it, guy picked me up and we went for a ride.

nickspeed
01-19-2010, 07:52 PM
I saw something that looks like a truck that had jwt cams in it, guy picked me up and we went for a ride.

At 2am in the back roads of east country.

R3DN1CK
01-19-2010, 08:02 PM
yep, that was it... think it might have been after an 10pm banks install, airport shuttle run, and some test driving.

nickspeed
01-19-2010, 08:03 PM
Yep that was a crazy nite!

O-Fivecc
01-19-2010, 08:49 PM
Are their going to be any other cam options for us 04-06 guys? Group buy price?? LOL JK

kha4079
01-19-2010, 08:54 PM
And there going called cvtcs cams, thats the name of the system nissan used for the vvt setup on the vk56. Been learing about the cotroller and what it does to the cams, crazy stuff.

whats the cam specs on it if u know them and can they make them with a lower lsa???

nickspeed
01-19-2010, 08:59 PM
Are their going to be any other cam options for us 04-06 guys? Group buy price?? LOL JK

I asked about working on a drag setup cam that would still work on the street. U say you want it to be loppy at idel, well jwt like it's to act as stock as possible at idel so it will be somg able. Plus then you have to turn the idle up to help stedy it which then make the truck want to go so you have to hold the brakes on at a stop light or it going to take off on you.

Layer1
01-19-2010, 09:06 PM
I asked about working on a drag setup cam that would still work on the street. U say you want it to be loppy at idel, well jwt like it's to act as stock as possible at idel so it will be somg able. Plus then you have to turn the idle up to help stedy it which then make the truck want to go so you have to hold the brakes on at a stop light or it going to take off on you.

Ah, brings back memories from my oldest brother Goat he use to have.

kha4079
01-19-2010, 09:07 PM
custom tuning will fix that issue :D if i have to idle @ 800 rpms then ill do it. gm guys idle at 800 rpms+ depending on how big of a cam it is. this is my friends truck when he had a 408 stroker kit with a 112 lsa stroker cam http://www.youtube.com/watch?v=Td-3xX9rkqY once he got it tuned it idled @ 1000 rpms and still very lopey :)

nickspeed
01-19-2010, 09:12 PM
whats the cam specs on it if u know them and can they make them with a lower lsa???

I will ask about the lsa, there is a lot that comes it to play with the vvt on the lob angle. And I will see if i can get the specs. Here is what they got for the V6 motors.
http://www.jimwolftechnology.com/wolfpdf/CAM_SPEC_CARD_VQ35_INCL_REVUP.pdf

nickspeed
01-19-2010, 09:13 PM
And this is a good read too.
http://www.jimwolftechnology.com/wolfpdf/camshaft_secrets.pdf

kha4079
01-19-2010, 09:23 PM
too much reading lol im still trying to catch up. if they cant make really lopey cams i can live with a 114 lsa or 115 lsa :D

nickspeed
01-19-2010, 09:27 PM
too much reading lol im still trying to catch up. if they cant make really lopey cams i can live with a 114 lsa or 115 lsa :D

The non vvt S2 cam is on 114 lsa, or very close to it.

nickspeed
01-19-2010, 09:31 PM
too much reading lol im still trying to catch up. if they cant make really lopey cams i can live with a 114 lsa or 115 lsa :D

Yea, talking with Clark will make you head hurt, just ask toomnymods. Clark is one smart wizard, Bosch and Ford engineer's call him to ask questions.

kha4079
01-19-2010, 10:02 PM
wow i didnt know that lol their products work wonders! :D

nickspeed
01-19-2010, 11:33 PM
wow i didnt know that lol their products work wonders! :D

And they do ecu's too. There is still so many Z32 customer's keeping then busy that they havent had time to sent up the 2000+ style ecu's.But there working on it.

This tool is sweet too.

http://www.jimwolftechnology.com/wolfpdf/VQ_SPRING_REMOVER_INST.pdf

06_footy
01-19-2010, 11:36 PM
Are their going to be any other cam options for us 04-06 guys? Group buy price?? LOL JK

I like a group buy..Im just saying this is the only groupie id ever be apart of with abunch of dudes. But seriously thats an awesome idea!

nickspeed
01-19-2010, 11:42 PM
If we can get ten on board I will ask.

08BLIZZARD
01-20-2010, 05:50 PM
id love to get my hands on a set of cams!!!!

R3DN1CK
01-20-2010, 07:59 PM
id love to get my hands on a set of cams!!!!

i'd rather have them in my motor

kha4079
01-20-2010, 08:17 PM
x2 :) i hope i get this job im testing for soon :D

R3DN1CK
01-23-2010, 05:10 AM
And they do ecu's too. There is still so many Z32 customer's keeping then busy that they havent had time to sent up the 2000+ style ecu's.But there working on it.

This tool is sweet too.

http://www.jimwolftechnology.com/wolfpdf/VQ_SPRING_REMOVER_INST.pdf

JWT makes some badass stuff, i had a little bucket 1.6 Sentra that had cams, ecu, flywheel, exhaust and a pop charger that would break off new RSX's and Si's. They make the magic happen for Nissan.

kha4079
01-23-2010, 08:13 PM
patiently waiting :)

tat2titan
01-24-2010, 04:18 PM
I'm still a couple mod's short of being ready to start saving for some JWT cam's. :)

I'm going to mod my exhaust 1st. I just bought a 2.25" - 3" Y-pipe, to replace my 3" BanK's Y. Toomnymod's said he lost too much low end from his Bank's, when he 1st. added his cam's. Then i'm going to build some B-pipes w/ hi-flow cat's.
After that it's time for some CAM'S!!!!

O-Fivecc
01-24-2010, 06:00 PM
Me too, I'm going to be piecing together some upgraded tranny parts along the way as well

nickspeed
01-25-2010, 12:26 AM
patiently waiting :)

Will have news very shortly, was working on the truck over the last two days.
http://i30.photobucket.com/albums/c340/nismonick/VK56/DSC_0224.jpg
http://i30.photobucket.com/albums/c340/nismonick/VK56/DSC_0240.jpg
http://i30.photobucket.com/albums/c340/nismonick/VK56/DSC_0239.jpg
http://i30.photobucket.com/albums/c340/nismonick/VK56/DSC_0251.jpg

R3DN1CK
01-25-2010, 01:50 AM
I've seen your insides.... that sounds wrong. Now lets see those Numbers!

nickspeed
01-25-2010, 02:44 AM
Numbers when were are all done testing.

R3DN1CK
01-25-2010, 02:50 AM
need more voulunteers?

nickspeed
01-25-2010, 03:04 AM
Yea, want two turbo's stuff in that engine bay?

R3DN1CK
01-25-2010, 03:04 AM
game on... let me know

Warp09
01-25-2010, 03:13 AM
Yea, want two turbo's stuff in that engine bay?

Hell yeah!!

von
01-25-2010, 03:15 AM
I'll let them keep y truck as long as they have too.

nickspeed
01-25-2010, 03:17 AM
There finishing up the twin turbo kit for the VHR 3.5L with the dual throttle body right now.

von
01-25-2010, 03:19 AM
Kool. Tell them we are next

nickspeed
01-25-2010, 03:20 AM
They hinted at it. Got to finish the cam testing first, then PGIM, then got from there.

von
01-25-2010, 03:21 AM
Kool. Let us know

kha4079
01-25-2010, 09:23 PM
ooooh man finish her up and put her on the dyno!! i wanna see how much she puts out with just the cam swap :D

R3DN1CK
01-26-2010, 03:05 AM
lets play the guessing game... everyone only gets 1 guess as to the increase in peak HP. Can't guess the same # as the other person and closest wins a prize to be determined. Maybe a JWT sticker or something like that.

R3DN1CK
01-26-2010, 03:40 AM
I will guess 21

08BLIZZARD
01-26-2010, 09:30 AM
18hp

nickspeed
01-26-2010, 12:16 PM
They made more then that.

08BLIZZARD
01-26-2010, 12:19 PM
damn... do i get a revote


can i have my cams yet?!?!?!?!?!

Warp09
01-26-2010, 02:39 PM
56 hp

nickspeed
01-26-2010, 02:44 PM
56 hp

I wish, when fully tuned they might.

nickspeed
01-26-2010, 02:44 PM
damn... do i get a revote


can i have my cams yet?!?!?!?!?!

Go for it!

R3DN1CK
01-26-2010, 02:45 PM
56 hp

stock motor, no intake, no exhaust... optimistic

Warp09
01-26-2010, 02:54 PM
Hmm, figured since Toomny made 30 HP on his, and you are VVT, it may close to double that! LOL
My guess is 41 HP now then lol

nickspeed
01-26-2010, 03:06 PM
Hmm, figured since Toomny made 30 HP on his, and you are VVT, it may close to double that! LOL
My guess is 41 HP now then lol

I got intake and exhaust coming so we will see where it stands when here on. VVT really does add as much power as it would seem :/ but that is untuned so there might still be a lot to get out of it.

nickspeed
01-26-2010, 03:10 PM
And will have to see what the PGIM does with the cams!

kha4079
01-26-2010, 10:24 PM
i think it gave at least 28-34 crank hp before tune :D after tinkering with the cam phasing im pretty sure itll be at least 30 rwhp :D

O-Fivecc
01-26-2010, 11:39 PM
must be nice

nickspeed
01-27-2010, 03:06 AM
i think it gave at least 28-34 crank hp before tune :D after tinkering with the cam phasing im pretty sure itll be at least 30 rwhp :D

Somebody is really close, and the gain is at hub's on the dynapack. With intake, exhaust and tune there should be a lot of power to be had.

kha4079
01-27-2010, 10:22 PM
what can i say i haz mad skills and guesses :D any new updates? im impatient!!!! lol

nickspeed
01-27-2010, 11:31 PM
what can i say i haz mad skills and guesses :D any new updates? im impatient!!!! lol

I went by jwt today and they were working in the PR, should have it by the end of the week.

von
01-28-2010, 01:16 AM
PR?

Twistedfreedom
01-28-2010, 02:22 AM
PreRunner?

R3DN1CK
01-28-2010, 03:38 AM
PR?

Press release

kha4079
01-28-2010, 10:47 PM
are they nitrous friendly cams??? :D

nickspeed
01-29-2010, 12:19 AM
are they nitrous friendly cams??? :D

Good question, I am not shure but they act just like the early ones do so if toomnymods and the others were on the bottle then I would say you fine.

SiMpLyMoDiFiEd
01-29-2010, 01:22 AM
what is the price range on these?

R3DN1CK
01-29-2010, 02:26 AM
what is the price range on these?

tba, would assume it would be with the press release

nickspeed
01-29-2010, 02:32 AM
what is the price range on these?

The early one's are 1198.99 so these will be in the same ball park.

http://www.jimwolftechnology.com/customer_part_detail.asp?PartID=473

SiMpLyMoDiFiEd
01-29-2010, 02:40 AM
So would we need uprev with these?

nickspeed
01-29-2010, 02:44 AM
So would we need uprev with these?

If you want max power yea, a handheld will not work with cams.

SiMpLyMoDiFiEd
01-29-2010, 02:51 AM
That's why I sold my headers didn't want to have to get uprev

nickspeed
01-29-2010, 02:54 AM
Most people that even up doing cams already have uprev so it is just a retune when they install the cams.

SiMpLyMoDiFiEd
01-29-2010, 03:02 AM
I would have had uprev but my superchips was Free

nickspeed
01-29-2010, 03:03 AM
Free is good!

von
01-29-2010, 03:05 AM
Yup street tunes are Badass. LoL. Thats not a bad price for cams. Bcs its 4 cams.

nickspeed
01-29-2010, 03:08 AM
$300 a cam x 4. A cam for any sohc set up is atleast $300.00ea

SiMpLyMoDiFiEd
01-29-2010, 03:14 AM
I love sponsers :)

von
01-29-2010, 03:18 AM
$300 a cam x 4. A cam for any sohc set up is atleast $300.00ea

True. True. True. Any type of after market cam is in that same price range $300+. So $1200 is a real good price for JWT cams. IMO

08BLIZZARD
01-29-2010, 11:34 AM
LET ME HAVE SOME!!!!!

and just for shits and giggles. those of you who are going to purchase, who will be doing your install??

R3DN1CK
01-29-2010, 07:59 PM
True. True. True. Any type of after market cam is in that same price range $300+. So $1200 is a real good price for JWT cams. IMO

agreed!

kha4079
01-30-2010, 11:09 PM
u sold headers cuz u didnt want to buy uprev???????????? wow its like throwing a tbone steak away just to eat chicken...

SiMpLyMoDiFiEd
01-31-2010, 06:25 PM
lol I will get more I have other things that are more important

kha4079
02-01-2010, 09:55 PM
kool whats the latest news???????

nickspeed
02-02-2010, 12:16 AM
There working on getting them made as we speak. They will be ready very soon! Who is going to be the fastest FST now?

08BLIZZARD
02-02-2010, 09:54 AM
There working on getting them made as we speak. They will be ready very soon! Who is going to be the fastest FST now?

with tru trac or without tru trac :)

O-Fivecc
02-02-2010, 11:34 AM
me

08BLIZZARD
02-02-2010, 11:46 AM
me

im pretty sure your right

O-Fivecc
02-02-2010, 01:09 PM
I think KHA may do it

nickspeed
02-02-2010, 02:56 PM
I would say it is going to be between you and KHA for shure!

O-Fivecc
02-02-2010, 03:20 PM
His truck is faster in the same DA

kha4079
02-02-2010, 10:02 PM
once i get long tubes ill probably get a lil faster ;)

O-Fivecc
02-02-2010, 11:02 PM
Yes, I think you will get a nip faster...And good lord man, get another CAI LOL...I actually just bought an OEM modded intake (only paid shipping). I'm thinking about putting it on and seeing what the difference is, just for shits and giggles. Man, if we got a good TB/Mani/cam set-up....Look out low 13's NA all day especially for you 07+ guys...maybe with a short belt squeeze out a high 12? That might be optimistic, worth a shot though. Then the Titan should be a pretty respectable truck, even NA

kha4079
02-03-2010, 10:19 PM
nah im good with my ghetto air intake :D whats the news on cams???

08BLIZZARD
02-04-2010, 10:06 AM
i will be in the 12's someday...(sigh)

kha4079
02-04-2010, 11:18 PM
lol u will its fun :D

von
02-08-2010, 10:28 PM
Its fun going fast

tat2titan
02-10-2010, 03:08 AM
Yes it is! I got a need for speed! LOL

kha4079
02-10-2010, 10:12 PM
updates plz :D

R3DN1CK
02-12-2010, 02:57 AM
updates plz :D

agreed, those cams have been in way too long without a pr.

nickspeed
02-12-2010, 03:23 AM
Waiting for the product to show up so when they say go there will be sticks on the shelf to buy. Then it will be here kitty kitty come and get it!

kha4079
02-12-2010, 10:26 PM
my card is shaking in my wallet :)

nickspeed
02-14-2010, 09:05 PM
Ok the Offical name is got to be CS2 CAMS for the cvtcs system. They will be here very soon and the PR will be out then!

kha4079
02-14-2010, 10:40 PM
Ok the Offical name is got to be CS2 CAMS for the cvtcs system. They will be here very soon and the PR will be out then!

woohoooo!!! thanks for the update!!!!:peace::peace::peace: