-
Project Giant Intake Manifold
-
Can't wait for this to get finished. Have you seen the TB that is supposedly coming out (over on MT)....I hope their TB and this manifold will bolt-up....Be sure to let me know if you get some gains out of this
-
I read the whole post on ct. When the TB comes out, I will see if jwt can get one and see if it fits this, that would be a sick combo for shure!
-
Yes it would. It would be cool to run low 13's without cams LOL, and mid 12's with bolt-ons and Nitrous.....Might even be able to get mid 12's from an NA cammed/stalled motor with this. low 12's seems possible since the cams are all about getting more air, and with this mod, its hard to say just how benificial it may be
-
Anymore pics of this project? How far are you into it?
-
This is the only pic so far,more to flow as they come.
-
Quote:
Originally Posted by
O-Fivecc
Yes it would. It would be cool to run low 13's without cams LOL, and mid 12's with bolt-ons and Nitrous.....Might even be able to get mid 12's from an NA cammed/stalled motor with this. low 12's seems possible since the cams are all about getting more air, and with this mod, its hard to say just how benificial it may be
Plus it you want to just set up you truck for draggin, you can get the N8 cams. You would have to set you idle high cause they will not idle low, to much over lap. But they would be rocket on the top end. ANd they would suck for daily driving, that is why the S2 are used.
-
Any more updates? I want it now.
-
Lol, working on the TB mount and fuel rails. The FX manifold is smaller across there the titan ones.
-
Kool. So he will sell the fuel rails with the kit? Or is it a one of kt??
-
Trying to us the stock titan fuel rails, Trying to make it as easy as a swap as it can be.
-
-
Can't we have a nice semi-aggressive street cam.....pretty ok for normal driving but a bit more aggressive for the track? Something like those Chevy boys that use their trucks as DD, but you can hear that cam lol
-
If im not mistaken thats the s2 cam ofive. The other cam is a tack cam
-
Gotcha LOL. I want some lope at idle LOL
-
I know what you mean. LoL
-
I will ask, they will do one off cams if we can get enough people to get them make, would need at least 10 people to make it happen. And u would have to do valve spring too. The S2 run all the way up to coil bind on the stock spring already.
-
That would be sweet getting bigger valves and springs with a P&P.
-
-
you can't lap those valves due to the coating I would also get new valve seats instead of cutting the stockers
-
Quote:
Originally Posted by
O-Fivecc
you would need to use the JWT springs with the JWT cams, EBAY springs prob won't be to spec.
-
I thought ebay items performed the best?? No?
-
my underwear gets wet evrytime i read a thread about the new cams!!!
-
the only bad thing is we cant change our shift points with uprev tuning :( im in the process of getting the intake manifold here local. with all the amount of airflow with that and a 90mm tb, im 99% sure that we will be needing bigger fuel injectors (except for the flex fuel guys they should have 38 lb injectors already).......
-
It's going to go to gether with the stock injectors first and see what it does first. If there maxed outt then the big dog's will go in.
-
Quote:
(except for the flex fuel guys they should have 38 lb injectors already)
Sweet, one less thing I have to worry about LOL
-
Quote:
Originally Posted by
O-Fivecc
Sweet, one less thing I have to worry about LOL
Until you get your turbo!
-
i have to stop reading shit like this b/c its just going to make me mod the engine and im trying to stay away from that lol
-
Quote:
Originally Posted by
nickspeed
Plus it you want to just set up you truck for draggin, you can get the N8 cams. You would have to set you idle high cause they will not idle low, to much over lap. But they would be rocket on the top end. ANd they would suck for daily driving, that is why the S2 are used.
nick... what can you do for my 04, bolt/swap out wise? i'd like it to sound like the Mega Death Cam setup like in this video. actually i'd like it to sound just like this and be fast as fuck as well. lolhttp://www.youtube.com/watch?v=lXirHHdjlgw
-
Quote:
Originally Posted by
dezert-hooligan
nick... what can you do for my 04, bolt/swap out wise? i'd like it to sound like the Mega Death Cam setup like in this video. actually i'd like it to sound just like this and be fast as fuck as well. lol
http://www.youtube.com/watch?v=lXirHHdjlgw
We need to build u a motor like the corr titan had!
-
Quote:
Originally Posted by
nickspeed
We need to build u a motor like the corr titan had!
damn... and Team Renezeder had 4 of those Menards-built Titan motors for sale... i just didn't have a few grand laying around at the time to pick one up. they had em up for sale on Renezeder's website. my mouth drooled at the pictures of them.
-
Quote:
Originally Posted by
dezert-hooligan
damn... and Team Renezeder had 4 of those Menards-built Titan motors for sale... i just didn't have a few grand laying around at the time to pick one up. they had em up for sale on Renezeder's website. my mouth drooled at the pictures of them.
How much was he asking?
-
i would assume aroudn the price of a new XE titan.
-
Quote:
Originally Posted by
R3DN1CK
i would assume aroudn the price of a new XE titan.
More like the price of two or three xe titan's!
-
Quote:
Originally Posted by
nickspeed
How much was he asking?
it was about 2 years ago... i want to say somewhere between 7-9 grand a motor... not sure how complete they were... although i'm sure they weren't more than 10,000 grand... 715 horses ready to bolt right in... i remember seeing them on Renezeder's home page and they had pics and everything... honestly cannot recall what those motors were running but i remember saying damn... that's a substantial downpayment yet not too bad a price.
here's a pic i took a few years ago at the Corr races at Chula Vista in the quarry... awesome track btw.. too bad Corr went bellyup
http://img201.imageshack.us/img201/7360/corrtitan.jpg
-
I wish i could get something like that
-
Quote:
Originally Posted by
von
I wish i could get something like that
X2!
-
Hooli our engines will never sound like that GTO. Thanks to the quad cam design
-
Quote:
Originally Posted by
Twistedfreedom
Hooli our engines will never sound like that GTO. Thanks to the quad cam design
there is nothing that will have it sounding close to that? hmmm, unless i take the vk56 out and dump an LS motor in?
-