PDA

View Full Version : Part number for transmission hose?



Misfit
02-07-2010, 06:10 PM
I need to replace the small hose on the bottom passenger side, that comes off the radiator. It makes a 90 degree bend and then connects to a metal line.

It had a small tag with a barcode, but the numbers don't match anything that I can find - 78575 17065

Any idea? :confused:

O-Fivecc
02-07-2010, 10:06 PM
I need it too LOL

nickspeed
02-07-2010, 10:32 PM
21633-zq00a

kha4079
02-07-2010, 10:44 PM
i had a problem with that hose leaking too. i bypassed the transmission cooler that goes inside the radiator and the one that goes in between the radiator and ac radiator. i put a big aftermarket one in front of all radiators :)

O-Fivecc
02-07-2010, 11:15 PM
I need a fuel hose too...thanks nickspeed for the other p#

nickspeed
02-08-2010, 06:08 AM
I need a fuel hose too...thanks nickspeed for the other p#

What fuel hose do you need?

O-Fivecc
02-08-2010, 08:06 AM
I don't know, it has to do with the Nitrous. The guy installing it called me and said I needed a new one, I'll have to look in there and see which one

Misfit
02-08-2010, 08:22 AM
21633-zq00a

Awesome, I'll get it ordered today. Thanks!:cheers:

von
02-08-2010, 10:37 PM
Did he brake it ofive?

O-Fivecc
02-08-2010, 10:38 PM
No its just old, But i broke a fitting today, had to order 3 cause I don't know what size I have LOL

von
02-08-2010, 10:39 PM
LoL. Have you ran it with NOS?

O-Fivecc
02-08-2010, 11:20 PM
A little. it was set-up for a 50 shot, but I didn't warm my bottle and PSI was at 580 or so LOL, plus I had to use a larger fuel jet size, so it was rich. Basically I didn't really even feel it, but I got my tune from RBs, so I was trying to add the 75 HP jets and broke a fitting. I ordered a bunch more jets too, just going to throw a 100 shot in there

von
02-08-2010, 11:28 PM
Ok. Nice. Post up some vids.

O-Fivecc
02-09-2010, 03:55 PM
I will, too bad I broke the fitting, cause I just go my GMR pickup so that I can run my Nitrous controller. I have everything I need, if only I wouldn't have broken a fitting LOL....I do need to find that fuel hose that is aged